Edible oil
A refinery runs on vacuum, steam and pumps that never get a day off.
Edible oil refinery maintenance for the GCC: keep the deodoriser vacuum steady, protect the transfer pump that feeds the refinery, and keep the filling line running.
Where the losses hide
Where a refinery loses its day.
Deodoriser and vacuum
Vacuum that slips, ejectors and condensers, and the steam that drives them.
Pumps and heat exchangers
Seals that weep, fouling, and steam traps nobody inspects.
Filling lines
Short stops and changeovers on the bottling line.
Four apps, set up for edible oil.
A refinery maintenance plan from the failures: the dry-run trip on the transfer pump, the vacuum system and the steam traps.
For edible oil →From forty numbers on a sheet to one board: yield, output and missed targets before 8 a.m.
For edible oil →Deodoriser vacuum slipping? The likely causes in order, and the real cause proven, even in another department.
For edible oil →A seal starting to weep on the transfer pump: one photo, the right person, a date, closed with the after photo.
For edible oil →The engineering intelligence built into every OPEX Suite app, working alongside your engineers. They stay in charge of every decision.
One case, start to finish
The vacuum kept slipping, and everyone said air leak.
- 01
Caught on day one
The missed target is on the board before 8 a.m., with an owner.
- 02
The cause, proven
EDPS ruled out the air leak in ten minutes and found the real cause in another department.
- 03
Planned from the failure
The pump that feeds the refinery had a dry-run trip nobody ever tested. Now it has a function test.
- 04
A small leak, stopped early
A seal starting to weep is tagged, fixed and closed with the after photo.

Results in edible oil
Results our team led in edible oil plants.
Capacity unlocked
A GCC edible-oil producer: 12,000 tonnes a year more from the assets it already had, with no new capital spend.
1 site · 10 monthsEnergy
Steam and gas in an edible-oil refinery: gas use per tonne down 26%, about US$860K a year.
1 refinery · 12 monthsAdvice as well as software
Need help on the floor too?
TPM and operational excellence consulting with your own team: see how we work with plants.
Other industries
Bring one machine that keeps stopping.
In a 30-minute demo, we'll show you how the four apps handle it, from the first tag to the fix that stays.